Skip to content
All work
2026Hardware lead — ENGR 100Completed

Course prototype: a capacitive soil-moisture probe drives an MCU that opens a solenoid valve only when the soil reads dry. Solar panel and battery feed the rail through a buck converter; 3D-printed parts hold the reservoir and boards.

Stack
MicrocontrollersSensorsSolar3D PrintingArduino
Outcomes

Yes

Working demo

ENGR 100

Context

Highlights
  • Moisture probe → MCU → solenoid valve with threshold / hysteresis behavior
  • Solar panel + battery + buck converter on the same bench rail
  • 3D-printed reservoir stand and board mounts through demo day
ENGR 100 lab — full sense → decide → water loop on the bench.

Gallery

Callouts — (1) panel (2) controller/MCU (3) moisture sensor (4) valve (5) water path.
Sensor and MCU detail.
Power and actuation path.
Valve and water path into the soil cup.
Panel characterization before trusting the rail.

Problem and outcome

Water the soil only when it is dry — with a solar-fed rail and a valve the MCU can open. Team demo on an ENGR 100 bench.

Role

Hardware and prototyping lead: sensor → MCU → valve path, power bring-up, and 3D-printed mounts. Mechanical and presentation work shared across the team.

System

solar panel + battery  →  buck  →  MCU rail
moisture probe  →  threshold (+ hysteresis)  →  solenoid valve → soil

Limitations

Course prototype, not a field-deployed irrigator. Labels on the annotated image match the visible hardware in the lab photo.